Have an MEP 003A with about 1200 hrs on it. Trying to determine how to wire it in to my house and the more I read the more confused I get…which isn’t hard to do. I’m trying to achieve a 240 volt/60 hz/single phase connection. The instruction on the unit read set the “reconnection switch” to the 3 o’clock position and turn the “ammeter-voltmeter transfer switch” to the L-1 and L-3 load position utilizing L-0 for neutral and grounding. However, in an article posted on Green Mountain website and authored by Kenneth Tollstam, he says to utilize lugs L-2 and L-3 for hot wires and L-0 for grounding and neutral. Can anyone set me straight please?