Viewing 3 reply threads
  • Author
    Posts
    • #2465
      lwkjr71
      Participant

      Looking for fuel consumption specs for the MEP 002 @ 1/4 load 1/2 load and full rated load
      Thanks
      Larry

    • #2467
      GMG
      Keymaster

      The MEP002A is about 1/2 gallon per hour and the MEP003A is about 1 gallon per hour. 1/4, 1/2 or full load is not a huge difference. The unit must run at 1800 rpm to generate 60H electricity. So you will burn a bit less at low load, but not much.

    • #9547
      rhphotog
      Participant

      Has anyone addressed the paralleling two or three 10kW gensets. Unlike the larger units they were not necessarily intended for parallel operation, but if this has already been done, I would rather not reinvent the wheel. If this hasn’t been done, I will. Thanks, /r

    • #9548
      rhphotog
      Participant

      Oops…the above was my first post, and I obviously stuck it in the wrong place.

Viewing 3 reply threads
  • You must be logged in to reply to this topic.