[olegeneralstore]

I have been following TM 9-6115-642-24 there is a test procedure for the ac circuit interrupter and circuits before this S5 switch. Every test has been followed and check out acceptable. I have 120/240 to the feed side and nothing to the load side. I am sure it is the 24 low volt feed to this interrupter. I am not getting 24volts when I hold up the ac circuit switch on the instrument panel. Anyone have any thoughts as to why I am not getting 24v dc to the s5?
Thank You
Bob

[olegeneralstore]

I have been following TM 9-6115-642-24 there is a test procedure for the ac circuit interrupter and circuits before this S5 switch. Every test has been followed and check out acceptable. I have 120/240 to the feed side and nothing to the load side. I am sure it is the 24 low volt feed to this interrupter. I am not getting 24volts when I hold up the ac circuit switch on the instrument panel. Anyone have any thoughts as to why I am not getting 24v dc to the s5?
Thank You
Bob

[olegeneralstore]

I am having the same problem. My generator worked well and ran my home for several weeks. Shut down and only cranked every other month and when I needed 2 months ago would not generate power to lugs. only convenience receptacle worked.
I could really use the help as we are in hurricane season in Florida.
Bob

[Author]

Posts

[olegeneralstore]

I have been following TM 9-6115-642-24 there is a test procedure for the ac circuit interrupter and circuits before this S5 switch. Every test has been followed and check out acceptable. I have 120/240 to the feed side and nothing to the load side. I am sure it is the 24 low volt feed to this interrupter. I am not getting 24volts when I hold up the ac circuit switch on the instrument panel. Anyone have any thoughts as to why I am not getting 24v dc to the s5?
Thank You
Bob

[olegeneralstore]

I have been following TM 9-6115-642-24 there is a test procedure for the ac circuit interrupter and circuits before this S5 switch. Every test has been followed and check out acceptable. I have 120/240 to the feed side and nothing to the load side. I am sure it is the 24 low volt feed to this interrupter. I am not getting 24volts when I hold up the ac circuit switch on the instrument panel. Anyone have any thoughts as to why I am not getting 24v dc to the s5?
Thank You
Bob

[olegeneralstore]

I am having the same problem. My generator worked well and ran my home for several weeks. Shut down and only cranked every other month and when I needed 2 months ago would not generate power to lugs. only convenience receptacle worked.
I could really use the help as we are in hurricane season in Florida.
Bob

[Author]

Posts