Category Archives: MEP003A

MEP003A Tips and Troubleshooting

MEP002A, MEP002A Generators and Parts, MEP003A, MEP003A, Support and Troubleshooting

GMG Fixes a Blown Oil Pump in a MEP003A – The Benefits of Our Warranty Program

Posted on by GMG
MEP003A-MEP002A-Blown-Oil-Pump-Gears-2
26
May

GMG recently fixed a blown oil pump in a customer’s MEP003A. Bad things can happen, even though we refurbish and load-bank a unit. Under our exclusive warranty program, we covered this repair. Typically, we only cover parts (not labor) in any warranty situation, but we made an exception and covered labor costs, which were over […]

Continue reading →
MEP002A, MEP002A Generators and Parts, MEP003A, MEP003A Generators and Parts, MEP802A Generators & Parts, MEP803A Generators & Parts, Support and Troubleshooting

So how do the MEP002A and MEP802A compare for noise? Listen for yourself

Posted on by GMG

We get this question a lot:  So how to MEP002A units compare to their new generation counterpart in terms of sound level? The former doesn’t have a sound kit (ASK = Acoustic Suppression Kit) and the latter does. Listen for yourself. It is a material difference, but the MEP002A is not nearly as loud as […]

Continue reading →
MEP002A, MEP002A Generators and Parts, MEP003A, MEP003A, MEP003A Generators and Parts, MEP701A Generators and Parts, Onan, Support and Troubleshooting

My Generator Starts When Cold, But Not When Hot!

Posted on by GMG
MEP002A-MEP003A-Facet-Fuel-Pump-Filter-And-Gasket-FEP42370-42370
07
May

We live in a crazy world! I thought warm diesel engines should start easier than cold ones?! “My Generator Starts When Cold, But Not When Hot!” That is a true statement and remains true. The problem might not lie in the engine itself or the injectors or the injection pump or anything related to the […]

Continue reading →
FAQ, MEP002A, MEP002A Generators and Parts, MEP003A, MEP003A, Support and Troubleshooting

Wiring Diagrams for MEP002A & MEP003A Military Diesel Generators

Posted on by GMG
MEP002A-MEP003A-Top-Panel-Wiring-Diagram-1-of-3[1]
24
Sep

We have had requests for diagrams for the MEP002A and MEP003A wiring.  In this post you will find 3 high resolution photos of a new Control Box that we have in stock (yes, it’s for sale;-). Hope this helps you with your electrical needs.

Continue reading →
FAQ, MEP002A, MEP002A Generators and Parts, MEP003A, MEP003A Generators and Parts, Support and Troubleshooting

Can I Run My 120/240V Wired House With A 120/208V Three Phase Generator?

Posted on by GMG

Below is a great video that concerns itself with answering this oft-asked question. Many military generators are only configured to output three phase electricity, especially the larger units including the MEP004A, MEP005a and up.  Note that the MEP002A and MEP003A models output single phase 120/240V single phase power just fine and are not the focus […]

Continue reading →
FAQ, MEP002A, MEP003A, Support and Troubleshooting

How To Break-In a New Re-manufactured Engine or a New Refurbished Generator from GMG

Posted on by GMG
Ring-Seating-on-Cylinder-Wall-Diesel-Engine-Break-in-Period
10
Dec

We get this question A LOT!  Some customers buy new MEP002A or MEP003A re-manufactured engines from GMG. Some buy our refurbished generators complete. In either case, we recommend a Break-In period, especially for re-manufactured engines.  For refurbished generators, we recommend an early oil change in the 50 hour range (vs the normal 100 interval) to […]

Continue reading →
MEP002A, MEP002A, MEP003A, MEP003A, Onan, Support and Troubleshooting, Yanmar

We Have Onan Diesel Fuel Injectors In Stock! Onan/Yanmar 147-0136

Posted on by GMG
MEP002A-MEP003A-Diesel-Fuel-Injector-Onan-1470136-NSN-2910008695668
26
Sep

Is your generator (MEP002A or MEP003A) sputtering?  Is it coughing smoke in a rhythm?  If it is, it could very well be time for new injectors that will improve the performance of your generator dramatically.  We now stock this very difficult to find injector. It was made by Onan in the early days and was […]

Continue reading →
MEP002A, MEP003A, Support and Troubleshooting

Re-energizing Dead Generators

Posted on by GMG

Two methods for field-flashing generators, one using an existing 110 volt source, one using an electric drill – by End Times Report Home generators in storage can “go flat” or lose their magnetism. Then they will not produce electricity, even though the small gasoline engine turning them is running just fine. There is a simple way to fix […]

Continue reading →
FAQ, MEP002A, MEP003A, Support and Troubleshooting

My Generator Is Not Generating, But The Engine Runs; Help!

Posted on by GMG
No-power-flash-generator-windings
15
Mar

One of our recent customers had a small scare with their new generator. Nothing dramatic, just puzzling. The engine started normally and everything seemed 100%, except for one issue:  no electricity was being generated to the main terminals or the convenience outlet.  Frustrating to say the least. The customer and GMG tried most of the […]

Continue reading →
FAQ, MEP002A, MEP002A Generators and Parts, MEP003A, MEP003A Generators and Parts, MEP016D Generators and Parts, MEP531A Generators and Parts, MEP701A Generators and Parts, Support and Troubleshooting

All Military Generators – All in One Place!

Posted on by GMG
Department-of-Defense-Logo-GMG
26
Feb

We have finally assembled what we believe is a relatively exhaustive list of past and present generators used by the US Military.  On this page, you will also see links to two versions of the: STANDARD-FAMILY-OF-MOBILE-ELECTRIC-POWER-GENERATING-SOURCES-GENERAL-DESCRIPTION-INFORMATION-AND-CHARACTERISTICS-DATA-SHEETS-MIL-HDBK One version was published in 2010 (MIL-HDBK-633A) and one published in 1998 (MIL-HDBK-633).  Both of these manuals have very […]

Continue reading →
MEP002A, MEP002A Generators and Parts, MEP003A, MEP003A Generators and Parts, Support and Troubleshooting

We Have Glow Plug Kits for MEP-002A and MEP-003A Diesel Generators

Posted on by GMG
MEP-002A-MEP-003A-Glow-Plug-NSN-2920001061817-Onan-333-0104-Onan-333-0107-Wellman-6A843G042K
22
Feb

We have them. They aren’t cheap, but they will help keep your unit 110% in the winter and cold starts. These will also help save your starter from over-working (same goes for your batteries). Follow link to purchase MEP-002A and MEP-003A 24v Glow Plugs.

Continue reading →
MEP002A, MEP002A Generators and Parts, MEP003A, MEP003A Generators and Parts, Support and Troubleshooting

Fuel Line Check Valve Problems

Posted on by GMG
MEP002A-MEP003A-Fuel-Line-Check-Valve-NSN-4820010491322
21
Feb

Many military generators have check valves in the fuel line system, often immediately after all of the filters, strainers, but before the injector pump. This prevents fuel from flowing backwards in the system and also helps the system hold its prime. The MEP-002A and MEP-003A units have a check valve located after the third filter […]

Continue reading →
FAQ, MEP002A, MEP003A, Support and Troubleshooting

How Noisy Are MEP002A and MEP003A Military Diesel Generators? The Same As Honda’s Best Worksite Unit!

Posted on by GMG

GMG gets this question a lot!  Many opinions can be had about the noise level of MEP-002A and MEP-003A diesel generator units. To protect your hearing around any engine or machinery, wear hearing protection! It’s cheap and your friends and family will thank you when you’re not screaming at them or the TV is blasting! […]

Continue reading →
MEP002A, MEP002A, MEP003A, MEP003A, Support and Troubleshooting

How To Wire a MEP002A or MEP003A Diesel Generator

Posted on by GMG

This article describes common power  generation connections and discusses the use of power transformers.  This is a scanned article and there may be typos and some odd images. We tried to scan and convert this so that it is more accessible on the Internet.  Please see all the figures and pictures at the end of […]

Continue reading →
MEP002A, MEP002A Generators and Parts, MEP003A, MEP003A Generators and Parts, Support and Troubleshooting

A Simple Generator Setup for Home Back-up Use

Posted on by GMG
MEP-003A-Generator-Mounted-On-Concrete-Sonotubes-With-Aux-Tank
19
Nov

This is a great example of a MEP003A installed for home use.  The unit is place on high ground that will drain well.  Then the entire area is covered with crushed stone to aid in water transport and to minimize mud kicking up on the unit.  4 modest sono-tubes are sunk in the ground to […]

Continue reading →
FAQ, MEP002A, MEP003A, Support and Troubleshooting

A Word About Our Batteries

Posted on by GMG

Below are the specs for civilian batteries for the MEP003A and MEP002A generators: MEP003A Units: Battery BCI # : BCI #24R Battery Height : 9″ Battery Length : 10 3/4″ Battery Voltage : 12 Volt Battery Width : 6 3/4″ Battery Cold Cranking Amps @ 0 Degrees F : 675 Battery Cranking Amps @ 32 Degrees F : 850 Battery Posts Type : Top Post Battery Reserve Capacity (Minutes) : 115 Battery Weight : 40 lbs […]

Continue reading →
FAQ, MEP002A, MEP003A, Support and Troubleshooting

New Ambac M-50 Manuals Posted

Posted on by GMG
MEP002A-MEP003A-Fuel-Injection-Pump-Ambac-M50
18
Oct

These manuals are for servicing your Ambac M-50 Fuel Injection Pumps for your MEP002A or MEP003A units. Not that we recommend that the average person attempt to service or rebuild your injection pump, but we want to provide all of the manuals we can find for you.  GMG will begin to offer a rebuild program […]

Continue reading →
FAQ, MEP002A, MEP003A, Support and Troubleshooting

Selecting Correct Injection Pump Timing Button and Injection Pump Installation for you MEP-002A or MEP-003A Ambac Fuel Injection Pump

Posted on by GMG

Selecting Correct Injection Pump Timing Button and Injection Pump Installation for you MEP-002A or MEP-003A Ambac Fuel Injection Pump M50/PSU IF NO. 3136 1/21/2009 1 Printed in USA Rev Level A Ambac International, 910 Spears Creek Court Elgin SC 29045(USA) – North America Telephone: 1-800- 628-6894 Fax: 1-800-542-8230 Website: www.ambac.net   DOWNLOAD THIS FILE:  Ambac-Timing-Button-For-M50-Injection-Pump-MEP002A-MEP003A-IF_No._3136 Selecting Correct […]

Continue reading →
MEP002A, MEP003A, Support and Troubleshooting

Electric Motors and Power Systems

Posted on by GMG

There seems to be a lot of confusion about the voltage standards for motors and why they are structured the way they are. There are, of course, two broad categories of motors, AC and DC. The voltage standards for these two decidedly different motors are much different from each other. It will be the goal […]

Continue reading →
FAQ, MEP002A, MEP003A, Support and Troubleshooting

Fuel Consumption For Diesel Generators

Posted on by GMG
Generator-Fuel-Consumption-Chart
29
Sep

This chart estimates diesel fuel consumption for a generator based on the size of the generator and the load at which the generator is operating.  Please note that this table is simply an estimate. Many other factors will affect the fuel efficiency of a diesel generator including design, fuel quality, air quality, and frequency of […]

Continue reading →